|
This is an ordinary float glass with a metallic
coating to reduce solar heat. This special metallic coating also produces a
mirror effect, preventing the subject from seeing through the glass. It is
mainly used in façades. Production Pyrolitic (On-Line): In this process,
semi-conducted metal oxides are directly applied to the glass during the float
glass production while the glass is still hot in the annealing lehr. These are
hard coatings which are relatively harmful to the environment. Vacuum
(magnetron) Process (off-line): In this process, one or more coats of metal oxide
are applied under a vacuum to finished glass. The coatings applied by this
technique are soft and must be protected against external influences and are
therefore used for the interior side of glass panes. There are some other
techniques for the OFF-LINE coating:
Immersion
Process
Chemical
Process
Foil Glazing
Screened
Glazing
|
|
|
|
|
